How to install wall cladding?

Step1：Draw a line horizontally on the wall at a distance of 40cm, and mark it every 40cm in the horizontal direction.Mark at 2.5cm above the intersection of the two lines, where the pre-drilling position is located.

Step2：Drilling holes at the marks and fix in the white expansion tube.

Step3：After cutting the joists, place it in align with the wall horizontal line.Mark the joist where the place is parallel to the pre-drilling holes, pre-drill at the mark, and then drive the expansion screws.

Step4：Fix the bottom edge trim.

Step5：Fix the first wall panel to the joist and install the remaining wall panels in turn.When the left site is not enough to put a whole decking, it can be cut according to the desired size to finish installation. 

Step6：Install side and top edge trims.